Dollar Universe Maintenance and Housekeeping

 Voir le site Dollar Universe Maintenance and Housekeeping

Error while Creating Distribution

For distribution of Uprocs when I try to select Origin Area and Uproc , I get an error "IO Connection problem-Dollar Universe service code'IO' not found". The screenshot of the error is attached. How can I fix this error.

12 January 2012

Solved : uxbck error

Hi, We got this error message: CODE### Backup of area / Sauvegarde de l'espace : EXP### Command / Commande : $UXEXE/uxbck uni soc=$S_SOCIETE node=$S_NOEUD $ESP dir=$UXARCHIVE idx Message code unknown : (-1) command in error!! ### Fatal error detected in step / Erreur (...)

15 December 2011

READ SOCKET FAILED

$U 5.6 was just recently installed on our prototype system. What is causing a READ SOCKET FAILED error when opening DQM.

13 December 2011

Solved : On line and cyclical purge doesn't work

Hi , I tried to activate the new "On line and cyclical purge" by following the instruction in "Tips & Tricks" but so far no sucess. To activate this purge mechanisme i deactivate the "Continuous purge" i used before, because neither is active know i'am getting great .dta files. I put (...)

9 August 2011

Solved : IO purge

Dear Orsyp/DU admins, we use the IO purge and are observing following behaviour within $U : for fla - these are being purged based on setup in configuration file, but purge is apparently omitting records for entries in event wait/disabled status with end of launch window 99/99/99: e.g: (...)

14 July 2011

Solved : u_charge_lst_upt error on startup

Solaris 10 patchset 8, $U 5.6 patch FX24901 I've looked and can't confirm but I think this is the second one of these we've had since applying FX24901, though the other one might have been lack of diskspace? The server has had no disk space issues, offline re-org seems to run fine. On (...)

12 July 2011

Solved : Regular Reorg job

Solaris 10 patchset 8, $U 5.6 patchset FX24901 We have a regular nightly job that does an online reorganisation but it seems to be suggested we should have a weekly offline reorganisation job. We have jobs running 24/7 so it is not easy to find a slot, in fact we are looking at three timeslots (...)

6 July 2011

Solved : Removing nodes,management units and TIH from $u

Hello, i've got $u v533 on Windows and $u V5.0 on VMS servers. My admin node is a v533 windows. we have remove nodes from architecture, but i've not already maintains my $u admin tables how do you think it can be done to remove nodes,mu and hdp from a admin tables on all my $u nodes ? what is (...)

30 June 2011

Solved : uxrazfic on u_fmlp50

We have an old $Universe 5.0.0 installation that recently had some host OS problems. The OS went up and down several times, with $Universe going up and down with it, sometimes in the middle of reorganization. We believe that in the midst of all this, the u_fmlp50.dta file got wiped out, and (...)

9 December 2010

Solved : Unable to distribute uproc

good morning together. When auto-retry mode is enabled and I try to distribute the uproc, I get the error massages "An error occured during distribution" or after "file->distribute" inside uproc-update "The distribution request could not be executed, Reason; Incompatibilty exists" This (...)

27 October 2010

Solved : Best policy for reorganization with 5.3.3 on Unix

Hi , We have migrated from Dollar Universe 5.0 to 5.3.3 on Linux, Solaris and AIX We used to launch IU_RTS_V3 which launches ux_vrf_rgz_rst every week. What should we do with 5.3.3. keep on IU_RTS ? schedule on line reorganization ? other ? Vincent (...)

8 September 2010

Solved : Session with errorhandling

Hi, For automating purposes I want to create a session from the command line. As long as I use solid jobs all is fine but then I want to use a generic job, which I supply with numbers and then I cannot give a follow up. This is what I mean This part goes fine $UXEXE/uxadd SES APP (...)

17 August 2010

removing/updating launchvar

Hi, I would like to change/delete/replace the launchvar within a uproc. I have to do 50 of these so I do not want to use mouse. I tried command like these: $UXEXE/uxupd UPR APP upr=GBIHU0300 LAUNCHVAR add varname=BESTAND vvalue=\"FC_kk_[0-9]*.dat\" $UXEXE/uxupd UPR (...)

16 August 2010

Solved : CDJ engine taking a lot of time to start

Hi, we are experiencing some problems with our main server when restarting $U: all the services and engines start straigh away except the CDJ service which takes around 45mins to start. During that time the server uses 100% of the CPU as the CDJ process takes as much resource as it can and we (...)

26 July 2010

Solved : online(continuous) purge questions

Hello, we've recently replaced uxpurge by officially recommended continuous (online) purge (UNIX), with retentions set generally to 10 days. I'd like to ask you for help regarding following questions: 1) It seems, that the online purge doesn't perform cleanup of entries in execution (...)

21 June 2010

uxdlt event wait

at the moment i can't understand it.... there is a uproc (started by a session),waiting for conditions. an other uproc will delete the uproc, if everthing is ok. on the weekend we installed fixes. now we have the problem, the uxdlt command doesn't work. for a better understanding i can see (...)

21 June 2010

Purge des jobs en TimeOverRun avec IU_PUR

Bonjour, J'ai mis en place la purge online des jobs sur une plateforme 5.1.3 patch level 24422. Les parametres de l'uproc IU_PUR sont les suivants : S_NBDAYS_HIST=93 S_STATUS_NBDAYS_HIST=93 S_NBDAYS_CTRL=93 S_STATUS_NBDAYS_CTRL=93 S_NBDAYS_LAUN=93 S_STATUS_NBDAYS_LAUN=93 De plus dans le (...)

11 May 2010

Solved : Sort sequence of list extraction by default

Hello all When you open the execution list you'll get the oldest event on the top, the newest on the buttom as default. Ok, you can change the sorting by pressing the headline of your column ("Start date" for instance) three times. Is there any possibility to change the sorting as (...)

6 May 2010

Calendar Definition

Hi, "upd_calendarsV10.ksh" is one of several scripts provided to us during the implementation and we now must maintain. With little or no document going with this, I need you experts out there to help me to understand what it is doing. $UXEXE/uxupd CAL NODE=$B_NODE $B_APP MU=\" 00\" (...)

1 March 2010

Solved : Value of variables will be shortened by using uxset var between 2 nodes

hello community, the value transfer from one node to the other does not functioning correctly. for example At node1: uproc1 with variable NUMBER is defined, its value is ABCDEFGH. CL-Code: $UXEXE/uxset var "NUMBER=$NUMBER" exit 0 At node2: uproc2 with the same variable NUMBER is defined (...)

24 February 2010

Solved : Message in universe.log

QUOTE << 2009-12-28 17:02:03 4403418/uxord /GAS39P41 /134452338 - %UNI_-E-U_EGAH39P3202, Procedure unknown in this environment << 2009-12-28 22:02:13 4403418/uxord /GAS39P41 /134452338 - %UNI_-E-U_EGAH39P3202, Procedure unknown in this (...)

19 February 2010

Solved : Large data file

HP Unix server, $U 5.2.3, offline backup followed by a reorg each week. All works fine but have noticed space warnings now as the backup is getting biggeer and bigger. Checking the reorg also noticed a very large data file u_fmcm 50 in the production area, 146851826 bytes with (...)

5 February 2010

Solved : IU_WMNT on Dollar Universe 5.3.3

Hi all, I've a question about maintenance procedure on Dollar Universe 5.3.3. I run a IU_WMNT uproc every week-end with theses parameters : UXKEEP_JOB_LOG : 30 UXARCHIVE : %UXDIR_ROOT%\archive UXAREA : APP INT SIM EXP UXARC_JOB_LOG : 2 Even if I choose 30 days keeping execution jobs (...)

3 February 2010

Solved : Migrate apps from one box to another

Hi there, We are running DU 5.5 on hpux 11.11. I'm seeking for a procedure to migrate some apps fr ServerA (MU=U_SERVERA) to ServerB (MU=U_SERVERB). On ServerA, I'm thinking of assign my apps to different MUs, and for certain MU I will just reassign it fr ServerA to ServerB. Is my method (...)

20 January 2010

Solved : Exchanger Engine Idle

Within one of our environments the Exchanger engine keeps going down for what seems like for no reason. We then have to manually go in and start the engine. Is there any reason for the Exchange engine to go down? This is Windows 2003 environment, non-clustered. This is happening two to three (...)

23 December 2009

cannot open job log

After the task was done and I right click to open the job log but it prompt "Can not open the job log" Anyone know how to fix it?

24 November 2009

Solved : CDJ errors in universe.log

Hi all, on all my $Universe servers I have this error in the universe.log occuring every 5-10 seconds: CODE<< 2009-11-04 12:05:20 0002084/UniServCdj /u_cdj_trt_req /000000000 - Error reading request: Connection closed (19725932) << 2009-11-04 (...)

4 November 2009

Solved : Script to find which process is using a port number on Solaris

Hello, This can be useful on Solaris when lsof is not available: CODEbash-2.05# cat find_PID_from_port #!/bin/ksh #******************************************************************************* **************************# # Purpose is to find the PID on which given port is active. # Need (...)

27 October 2009

Solved : Best way to do a full refresh of a node

Hi there, we have development environments which need to be refreshed quite often of their $U development objects (UPR, SES, RES, TSK) and I was wondering what's the best way to do that to avoid corruption and low performance. For now we just do: deletion of all the objects import of the (...)

2 October 2009

Solved : Invalid Data in MU Table etc

Hello, we working in a big environment $U Installations > 150. Due to some changes in the environment (Server goes out of Live etc). We have invalid Data in MU Table MU Directories APP Directories and so on. The Node was deleted from Node List but the correspondend Data in these Tables NOT. (...)

29 September 2009

Solved : Dollar Universe Desktop / Execution timing problem

Hello all, preliminary informations: OS=windows XP $U-Version=5.3.1 When I try to display the list of executions of a specific node, the buildup lasts about 10 minutes . Pressing "ESC"-Button you will either see an uncompleted list or a completed list of executions, it depends on the time (...)

23 September 2009

Solved : Successful IU_RTS run .. is a dream ?!

Hi, Greetings to all !! We have $U V5.0 running in a two node OpenVMS cluster (runs on both the ndoes). During every maintenance, we shut down $U in one of the node and run the IU_RTS job from the other node. Not any time we have had a complete reorganization of all FDL $U database files. ( (...)

17 September 2009

Solved : Purge : uxpurge (IU_PUR) vs Purge on the fly

Hello, I've been using Dollar Universe for quite some time (back to V4) and was regularly running the IU_PUR / uxpurge purge. The job was launched every day to ensure $U data files would not grow out of control. I have recently upgraded from V500 to V513 on Unix boxes and V500 to V523 on (...)

17 September 2009

Purge on the fly start

Running version 5.2.3 on Windows 2003 and just added parameteres to uxsetenv and the .def files in the EXEC directory so that purging on the fly is employed. This already works fine on 5.2.3 installations on UNIX servers with the same settings. Purge is set to be 3 days and this was set up (...)

17 September 2009

ux_raz_fic/uxrazfic tool

Hello, as we have several topics mentioning the use or possibility to use the "ux_raz_fic", here are some explanations and comments: ux_raz_fic/uxrazfic (depending on the OS) allows to reinitialize a Dollar Universe data file. It empties the data file and the associated index file. (...)

17 September 2009

Reorg online (uxrgz uni all)

O:\>cd orsyp O:\orsyp>cd lotto5 O:\orsyp\LOTTO5>cd mgr O:\orsyp\LOTTO5\mgr>uxsetenv O:\orsyp\LOTTO5\mgr>ECHO OFF O:\orsyp\LOTTO5\mgr>cd %uxexe% O:\orsyp\LOTTO5\exec>uxrgz uni all Command : (...)

17 September 2009

Reorganization : How often?

Hi, I daily purge the $U files, but do not run the reorganization very frequently, only usually when the performance seem to decrease or after a system crash. Have you got any recommendation? Would once a month be enough? Eric (...)

17 September 2009

ux_raz_fic : what are the recommendations?

Hello, I was checking another thread when I came across the use of ux_raz_fic. I know this tool allows to reinitialize a $U data file but that you should be careful using it. What are the recommendations? Have Orsyp also specific (...)

17 September 2009

Solved : Problem of language

Hello! $Universe 5.0 is installed as for the documentation. I have a problem of language. While using univ5 some of the menu options [ e.g companies, nodes, Management Units, Applications Directories, Users, Sessions etc] are showed in French instead of English!!! . S_U_LANGUE is set to "EN". (...)

17 September 2009

Solved : Successful IU_RTS run .. is a dream ?!

Hi, Greetings to all !! We have $U V5.0 running in a two node OpenVMS cluster (runs on both the ndoes). During every maintenance, we shut down $U in one of the node and run the IU_RTS job from the other node. Not any time we have had a complete reorganization of all FDL $U database files. ( (...)

8 September 2009

Solved : Purge : uxpurge (IU_PUR) vs Purge on the fly

Hello, I've been using Dollar Universe for quite some time (back to V4) and was regularly running the IU_PUR / uxpurge purge. The job was launched every day to ensure $U data files would not grow out of control. I have recently upgraded from V500 to V513 on Unix boxes and V500 to V523 on (...)

8 September 2009

Solved : Purge on the fly start

Running version 5.2.3 on Windows 2003 and just added parameteres to uxsetenv and the .def files in the EXEC directory so that purging on the fly is employed. This already works fine on 5.2.3 installations on UNIX servers with the same settings. Purge is set to be 3 days and this was set up (...)

8 September 2009

Solved : ux_raz_fic/uxrazfic tool

Hello, as we have several topics mentioning the use or possibility to use the "ux_raz_fic", here are some explanations and comments: ux_raz_fic/uxrazfic (depending on the OS) allows to reinitialize a Dollar Universe data file. It empties the data file and the associated index file. (...)

8 September 2009

Solved : Reorg online (uxrgz uni all)

O:\>cd orsyp O:\orsyp>cd lotto5 O:\orsyp\LOTTO5>cd mgr O:\orsyp\LOTTO5\mgr>uxsetenv O:\orsyp\LOTTO5\mgr>ECHO OFF O:\orsyp\LOTTO5\mgr>cd %uxexe% O:\orsyp\LOTTO5\exec>uxrgz uni all Command : (...)

8 September 2009

Solved : Reorganization : How often?

Hi, I daily purge the $U files, but do not run the reorganization very frequently, only usually when the performance seem to decrease or after a system crash. Have you got any recommendation? Would once a month be enough? Eric (...)

8 September 2009

Solved : ux_raz_fic : what are the recommendations?

Hello, I was checking another thread when I came across the use of ux_raz_fic. I know this tool allows to reinitialize a $U data file but that you should be careful using it. What are the recommendations? Have Orsyp also specific (...)

8 September 2009

Solved : Problem of language

Hello! $Universe 5.0 is installed as for the documentation. I have a problem of language. While using univ5 some of the menu options [ e.g companies, nodes, Management Units, Applications Directories, Users, Sessions etc] are showed in French instead of English!!! . S_U_LANGUE is set to "EN". (...)

8 September 2009

Solved : Frequent $U hang regd. (V4.3 on VAX VMS)

Hi all, Platform: VAX OS: OpenVMS V6.2 $U version: 4.3 We have a customer environment using $U as stated above. Recently we have been facing frequent hang of $Universe resulting in job new jobs getting submitted and jobs found in "Executing" state for a long time than expected. Only $U (...)

4 August 2009

Solved : Frequent $U hang regd. (V4.3 on VAX VMS)

Hi all, Platform: VAX OS: OpenVMS V6.2 $U version: 4.3 We have a customer environment using $U as stated above. Recently we have been facing frequent hang of $Universe resulting in job new jobs getting submitted and jobs found in "Executing" state for a long time than expected. Only $U (...)

4 August 2009

Solved : New online purge - problems with disabled status

Hello, I've tried to use new online purge, all variables were set for 30 or more days except disabled status (LAN_RET_H=001:00:00). After check I saw disabled launches of jobs for longer period. Then I tried to changed values of other variables one by one, and after I changed the value of (...)

29 July 2009

New online purge - problems with disabled status

Hello, I've tried to use new online purge, all variables were set for 30 or more days except disabled status (LAN_RET_H=001:00:00). After check I saw disabled launches of jobs for longer period. Then I tried to changed values of other variables one by one, and after I changed the value of (...)

29 July 2009

Solved : exchanger problem?

Hello Sirs, at our company we have to start HDP-sessions which run over two MUs. But the exchange from one MU to the other lasts very long. So I created a simple test session called "s_test", which contains a uproc, named "test". The code of this uproc is only "exit 0". The session is (...)

23 July 2009

Solved : exchanger problem?

Hello Sirs, at our company we have to start HDP-sessions which run over two MUs. But the exchange from one MU to the other lasts very long. So I created a simple test session called "s_test", which contains a uproc, named "test". The code of this uproc is only "exit 0". The session is (...)

23 July 2009

Solved : Monitoring log files and what to look for ?

Hello, I am recreating this thread initially posted by thetadgh: Hi all I've been looking in my universe.log and finding errors like : "<< 2009-05-06 00:01:32 0000808/UniServEch /u_io_callsrv_ver /000000000 - u_gethostbyname_mf error : Unknown host (host [tgspapp3])" when (...)

25 June 2009

Solved : Monitoring log files and what to look for ?

Hello, I am recreating this thread initially posted by thetadgh: Hi all I've been looking in my universe.log and finding errors like : "<< 2009-05-06 00:01:32 0000808/UniServEch /u_io_callsrv_ver /000000000 - u_gethostbyname_mf error : Unknown host (host [tgspapp3])" when (...)

25 June 2009

Solved : Error message in universe.log "Aucune connexion n'a pu être établie car l'ordinateur cible l'a expressément refusée"

Hi all, I encounter a strange message in universe.log of global control : << 2009-06-18 11:41:36 0003116/JobMonitorApp /connect_inet_com /135888915 - connection on host <my_node> port 11015 [SOCIETE_DQM_X] err 10061 , -Aucune connexion n'a pu être établie car l'ordinateur (...)

18 June 2009

Error message in universe.log

Hi all, I encounter a strange message in universe.log of global control : << 2009-06-18 11:41:36 0003116/JobMonitorApp /connect_inet_com /135888915 - connection on host <my_node> port 11015 [SOCIETE_DQM_X] err 10061 , -Aucune connexion n'a pu être établie car l'ordinateur (...)

18 June 2009

Solved : Very big Universe.log

Hi, I'm encountering an issue with my universe.log (Global Control v533 + 24567 and 24584 on windows). It reaches a size of 4Go. I use Graphic Job Monitor and the size of the universe.log is caused by the verbosity of this application : << 2009-06-17 16:49:58 (...)

17 June 2009

Very big Universe.log

Hi, I'm encountering an issue with my universe.log (Global Control v533 + 24567 and 24584 on windows). It reaches a size of 4Go. I use Graphic Job Monitor and the size of the universe.log is caused by the verbosity of this application : << 2009-06-17 16:49:58 (...)

17 June 2009

IO_PURGE vs. on the fly purge

Reading the last post regarding that topic, I understood that on-the-fly-purge is an old technique and replaced by IO_PURGE. Parameters regarding on-the-fly-purge in uxsetenv should be commented or deleted. Is that right? I was told IO_PURGE replaces uxpurge delivered in uproc IU_PUR each (...)

17 March 2009

IO_PURGE vs. on the fly purge

Reading the last post regarding that topic, I understood that on-the-fly-purge is an old technique and replaced by IO_PURGE. Parameters regarding on-the-fly-purge in uxsetenv should be commented or deleted. Is that right? I was told IO_PURGE replaces uxpurge delivered in uproc IU_PUR each (...)

17 March 2009

Solved : Delete time overrun jobs

Can someone please help with deleting time-overrun jobs (from the command line)? There are several thousand and trying to delete from the GUI is painful! But I cannot seem to make UXDLT work. Thanks Paul

2 March 2009

Solved : Delete time overrun jobs

Can someone please help with deleting time-overrun jobs (from the command line)? There are several thousand and trying to delete from the GUI is painful! But I cannot seem to make UXDLT work. Thanks Paul

2 March 2009

Solved : Online purge FX24584

Hello, i want to make some tests with the new online purge. We have V5.3.3 UNIX, FX24584 is installed. Parameter U_IO_PURGE_ENABLE is set to Y in the uxsetenv files. I try the command ./chkPurParFic ../exp/data/u_purge_param.ref --> syntax of purge parameters file OK The next (...)

9 February 2009

Solved : Online purge FX24584

Hello, i want to make some tests with the new online purge. We have V5.3.3 UNIX, FX24584 is installed. Parameter U_IO_PURGE_ENABLE is set to Y in the uxsetenv files. I try the command ./chkPurParFic ../exp/data/u_purge_param.ref --> syntax of purge parameters file OK The next (...)

9 February 2009

Solved : Historic of "suivi d'exploitation"

Hello, in Dollar universe 5.1, there is a button "Suivi d'exploitation", inside we have the historic. in my $U, there is only 2 historic days. how we can increase the historic day ? Thank you best regards

2 February 2009

Solved : Historic of "suivi d'exploitation"

Hello, in Dollar universe 5.1, there is a button "Suivi d'exploitation", inside we have the historic. in my $U, there is only 2 historic days. how we can increase the historic day ? Thank you best regards

2 February 2009

Solved : windows Extraction without UXEXT

Helloworld It is possible to use a combinaison of uxlst and uxadd to extract and reimport. Here is a solution on windows to extract user and node objects in text file: CODEset source_node=%1 set nodefile=node_file.txt set userfile=user_file.txt %uxexe%\uxlst NODE TNODE^=* (...)

23 January 2009

Solved : windows Extraction without UXEXT

Helloworld It is possible to use a combinaison of uxlst and uxadd to extract and reimport. Here is a solution on windows to extract user and node objects in text file: CODEset source_node=%1 set nodefile=node_file.txt set userfile=user_file.txt %uxexe%\uxlst NODE TNODE^=* (...)

23 January 2009

Solved : Reorganization taking too much time

Hello, we had a power failure on some of our boxes and some Dollar Universe index files got damaged (Unix / Windows). We ran a reorganization which took between 15 minutes and 2 hours - which was too long. Why was the reorganization so long? How to improve it? We use several Areas on some (...)

22 January 2009

Solved : Reorganization taking too much time

Hello, we had a power failure on some of our boxes and some Dollar Universe index files got damaged (Unix / Windows). We ran a reorganization which took between 15 minutes and 2 hours - which was too long. Why was the reorganization so long? How to improve it? We use several Areas on some (...)

22 January 2009

Solved : ux_razfic

Hello we need to execute the ux_razfic command on u_fmhs50 and u_fmph. Are there any special issues that we have to look after? Yours sincerely, ringhio

24 December 2008

Solved : ux_razfic

Hello we need to execute the ux_razfic command on u_fmhs50 and u_fmph. Are there any special issues that we have to look after? Yours sincerely, ringhio

24 December 2008

Solved : Extract all objects

Hello here is a little command to extract all objects for $U on unix if you want to move them to another node. CODEfor s_esp in app int sim exp; do for s_obj in upr ses; do echo "" >>./extract.log; echo "***********$s_esp $s_obj************" >>./extract.log; (...)

20 November 2008

Solved : Extract all objects

Hello here is a little command to extract all objects for $U on unix if you want to move them to another node. CODEfor s_esp in app int sim exp; do for s_obj in upr ses; do echo "" >>./extract.log; echo "***********$s_esp $s_obj************" >>./extract.log; (...)

20 November 2008

Solved : Automatic startup $U when server starts on Windows

Hello, I am wondering who has experience with ensuring that $U is started when our server gets restarted. Last week we had to restart due to MS patch on the server and everything (services) started nicely but not $U. I prefer not to create my own batch file but I want to call the (...)

11 November 2008

Solved : Automatic startup $U when server starts on Windows

Hello, I am wondering who has experience with ensuring that $U is started when our server gets restarted. Last week we had to restart due to MS patch on the server and everything (services) started nicely but not $U. I prefer not to create my own batch file but I want to call the (...)

11 November 2008

Solved : UXEXE\find command

This doesn't appear to exist in the "Command Line" manual, so presumably it has been added. I have discovered that this command is case sensitive and, consequently, not performing its duties as expected. Can someone advise what the options are and whether I can force it to be non-case (...)

3 November 2008

Solved : UXEXE\find command

This doesn't appear to exist in the "Command Line" manual, so presumably it has been added. I have discovered that this command is case sensitive and, consequently, not performing its duties as expected. Can someone advise what the options are and whether I can force it to be non-case (...)

3 November 2008

Solved : 5.23 and IU_RTS

We have a mixture of 5.20 and 5.23 servers (looking to standardise on 5.23). Is there an update to IU_RTS or is maintenance done differently in the new version?

30 October 2008

Solved : 5.23 and IU_RTS

We have a mixture of 5.20 and 5.23 servers (looking to standardise on 5.23). Is there an update to IU_RTS or is maintenance done differently in the new version?

30 October 2008

Solved : Moving company process

Hi. Is there a procedure for moving company $U from one folder to another ?

23 October 2008

Solved : Moving company process

Hi. Is there a procedure for moving company $U from one folder to another ?

23 October 2008

Solved : Launcher process problems

Hallo everyone Since a couple of days we have a problem with the Launcher process. The launcher process stops working without user intervention and sets the wakeupdate to 2099. (see uxlst command below) As soon as we shut down the $Universe application and restart it, it works again until the (...)

10 October 2008

Solved : Launcher process problems

Hallo everyone Since a couple of days we have a problem with the Launcher process. The launcher process stops working without user intervention and sets the wakeupdate to 2099. (see uxlst command below) As soon as we shut down the $Universe application and restart it, it works again until the (...)

10 October 2008