Solved : IU_WMNT on Dollar Universe 5.3.3
Hi all,
I've a question about maintenance procedure on Dollar Universe 5.3.3.
I run a IU_WMNT uproc every week-end with theses parameters :
UXKEEP_JOB_LOG : 30
UXARCHIVE : %UXDIR_ROOT%\archive
UXAREA : APP INT SIM EXP
UXARC_JOB_LOG : 2
Even if I choose 30 days keeping execution jobs Dollar Universe always just keep 7 days of job log in execution panel and I wonder why.
More, if I take a look at D:\APPL\universe\UBIPRD\exp\log I can just see ".inp" and ".out" files for process older than 2 days , as I understand so it archive just the log files older than 2 days but keep the ".inp" & ".out" files.
Does someone can confirm this and know why graphical console shows just 7 days of execution even if the UXKEEP_JOB_LOG is setup to 30 ?
Thanks by advance for your help.
Dollar Universe Maintenance and Housekeeping
Dollar Universe Maintenance and Housekeeping
12 janvier 2012 : Error while Creating Distribution
For distribution of Uprocs when I try to select Origin Area and Uproc , I get an error "IO Connection problem-Dollar Universe service code'IO' not found". The screenshot of the error is attached. How can I fix this error.
15 décembre 2011 : Solved : uxbck error
Hi, We got this error message: CODE### Backup of area / Sauvegarde de l'espace : EXP### Command / Commande : $UXEXE/uxbck uni soc=$S_SOCIETE node=$S_NOEUD $ESP dir=$UXARCHIVE idx Message code unknown : (-1) command in error!! ### Fatal error detected in step / Erreur (...)
13 décembre 2011 : READ SOCKET FAILED
$U 5.6 was just recently installed on our prototype system. What is causing a READ SOCKET FAILED error when opening DQM.
9 août 2011 : Solved : On line and cyclical purge doesn't work
Hi , I tried to activate the new "On line and cyclical purge" by following the instruction in "Tips & Tricks" but so far no sucess. To activate this purge mechanisme i deactivate the "Continuous purge" i used before, because neither is active know i'am getting great .dta files. I put (...)
14 juillet 2011 : Solved : IO purge
Dear Orsyp/DU admins, we use the IO purge and are observing following behaviour within $U : for fla - these are being purged based on setup in configuration file, but purge is apparently omitting records for entries in event wait/disabled status with end of launch window 99/99/99: e.g: (...)
12 juillet 2011 : Solved : u_charge_lst_upt error on startup
Solaris 10 patchset 8, $U 5.6 patch FX24901 I've looked and can't confirm but I think this is the second one of these we've had since applying FX24901, though the other one might have been lack of diskspace? The server has had no disk space issues, offline re-org seems to run fine. On (...)
6 juillet 2011 : Solved : Regular Reorg job
Solaris 10 patchset 8, $U 5.6 patchset FX24901 We have a regular nightly job that does an online reorganisation but it seems to be suggested we should have a weekly offline reorganisation job. We have jobs running 24/7 so it is not easy to find a slot, in fact we are looking at three timeslots (...)
30 juin 2011 : Solved : Removing nodes,management units and TIH from $u
Hello, i've got $u v533 on Windows and $u V5.0 on VMS servers. My admin node is a v533 windows. we have remove nodes from architecture, but i've not already maintains my $u admin tables how do you think it can be done to remove nodes,mu and hdp from a admin tables on all my $u nodes ? what is (...)
9 décembre 2010 : Solved : uxrazfic on u_fmlp50
We have an old $Universe 5.0.0 installation that recently had some host OS problems. The OS went up and down several times, with $Universe going up and down with it, sometimes in the middle of reorganization. We believe that in the midst of all this, the u_fmlp50.dta file got wiped out, and (...)
27 octobre 2010 : Solved : Unable to distribute uproc
good morning together. When auto-retry mode is enabled and I try to distribute the uproc, I get the error massages "An error occured during distribution" or after "file->distribute" inside uproc-update "The distribution request could not be executed, Reason; Incompatibilty exists" This (...)
8 septembre 2010 : Solved : Best policy for reorganization with 5.3.3 on Unix
Hi , We have migrated from Dollar Universe 5.0 to 5.3.3 on Linux, Solaris and AIX We used to launch IU_RTS_V3 which launches ux_vrf_rgz_rst every week. What should we do with 5.3.3. keep on IU_RTS ? schedule on line reorganization ? other ? Vincent (...)
17 août 2010 : Solved : Session with errorhandling
Hi, For automating purposes I want to create a session from the command line. As long as I use solid jobs all is fine but then I want to use a generic job, which I supply with numbers and then I cannot give a follow up. This is what I mean This part goes fine $UXEXE/uxadd SES APP (...)
16 août 2010 : removing/updating launchvar
Hi, I would like to change/delete/replace the launchvar within a uproc. I have to do 50 of these so I do not want to use mouse. I tried command like these: $UXEXE/uxupd UPR APP upr=GBIHU0300 LAUNCHVAR add varname=BESTAND vvalue=\"FC_kk_[0-9]*.dat\" $UXEXE/uxupd UPR (...)
26 juillet 2010 : Solved : CDJ engine taking a lot of time to start
Hi, we are experiencing some problems with our main server when restarting $U: all the services and engines start straigh away except the CDJ service which takes around 45mins to start. During that time the server uses 100% of the CPU as the CDJ process takes as much resource as it can and we (...)
21 juin 2010 : Solved : online(continuous) purge questions
Hello, we've recently replaced uxpurge by officially recommended continuous (online) purge (UNIX), with retentions set generally to 10 days. I'd like to ask you for help regarding following questions: 1) It seems, that the online purge doesn't perform cleanup of entries in execution (...)
21 juin 2010 : uxdlt event wait
at the moment i can't understand it.... there is a uproc (started by a session),waiting for conditions. an other uproc will delete the uproc, if everthing is ok. on the weekend we installed fixes. now we have the problem, the uxdlt command doesn't work. for a better understanding i can see (...)
11 mai 2010 : Purge des jobs en TimeOverRun avec IU_PUR
Bonjour, J'ai mis en place la purge online des jobs sur une plateforme 5.1.3 patch level 24422. Les parametres de l'uproc IU_PUR sont les suivants : S_NBDAYS_HIST=93 S_STATUS_NBDAYS_HIST=93 S_NBDAYS_CTRL=93 S_STATUS_NBDAYS_CTRL=93 S_NBDAYS_LAUN=93 S_STATUS_NBDAYS_LAUN=93 De plus dans le (...)
6 mai 2010 : Solved : Sort sequence of list extraction by default
Hello all When you open the execution list you'll get the oldest event on the top, the newest on the buttom as default. Ok, you can change the sorting by pressing the headline of your column ("Start date" for instance) three times. Is there any possibility to change the sorting as (...)
1er mars 2010 : Calendar Definition
Hi, "upd_calendarsV10.ksh" is one of several scripts provided to us during the implementation and we now must maintain. With little or no document going with this, I need you experts out there to help me to understand what it is doing. $UXEXE/uxupd CAL NODE=$B_NODE $B_APP MU=\" 00\" (...)
24 février 2010 : Solved : Value of variables will be shortened by using uxset var between 2 nodes
hello community, the value transfer from one node to the other does not functioning correctly. for example At node1: uproc1 with variable NUMBER is defined, its value is ABCDEFGH. CL-Code: $UXEXE/uxset var "NUMBER=$NUMBER" exit 0 At node2: uproc2 with the same variable NUMBER is defined (...)
19 février 2010 : Solved : Message in universe.log
QUOTE << 2009-12-28 17:02:03 4403418/uxord /GAS39P41 /134452338 - %UNI_-E-U_EGAH39P3202, Procedure unknown in this environment << 2009-12-28 22:02:13 4403418/uxord /GAS39P41 /134452338 - %UNI_-E-U_EGAH39P3202, Procedure unknown in this (...)
5 février 2010 : Solved : Large data file
HP Unix server, $U 5.2.3, offline backup followed by a reorg each week. All works fine but have noticed space warnings now as the backup is getting biggeer and bigger. Checking the reorg also noticed a very large data file u_fmcm 50 in the production area, 146851826 bytes with (...)
3 février 2010 : Solved : IU_WMNT on Dollar Universe 5.3.3
Hi all, I've a question about maintenance procedure on Dollar Universe 5.3.3. I run a IU_WMNT uproc every week-end with theses parameters : UXKEEP_JOB_LOG : 30 UXARCHIVE : %UXDIR_ROOT%\archive UXAREA : APP INT SIM EXP UXARC_JOB_LOG : 2 Even if I choose 30 days keeping execution jobs (...)
20 janvier 2010 : Solved : Migrate apps from one box to another
Hi there, We are running DU 5.5 on hpux 11.11. I'm seeking for a procedure to migrate some apps fr ServerA (MU=U_SERVERA) to ServerB (MU=U_SERVERB). On ServerA, I'm thinking of assign my apps to different MUs, and for certain MU I will just reassign it fr ServerA to ServerB. Is my method (...)
23 décembre 2009 : Solved : Exchanger Engine Idle
Within one of our environments the Exchanger engine keeps going down for what seems like for no reason. We then have to manually go in and start the engine. Is there any reason for the Exchange engine to go down? This is Windows 2003 environment, non-clustered. This is happening two to three (...)
24 novembre 2009 : cannot open job log
After the task was done and I right click to open the job log but it prompt "Can not open the job log" Anyone know how to fix it?
4 novembre 2009 : Solved : CDJ errors in universe.log
Hi all, on all my $Universe servers I have this error in the universe.log occuring every 5-10 seconds: CODE<< 2009-11-04 12:05:20 0002084/UniServCdj /u_cdj_trt_req /000000000 - Error reading request: Connection closed (19725932) << 2009-11-04 (...)
27 octobre 2009 : Solved : Script to find which process is using a port number on Solaris
Hello, This can be useful on Solaris when lsof is not available: CODEbash-2.05# cat find_PID_from_port #!/bin/ksh #******************************************************************************* **************************# # Purpose is to find the PID on which given port is active. # Need (...)
2 octobre 2009 : Solved : Best way to do a full refresh of a node
Hi there, we have development environments which need to be refreshed quite often of their $U development objects (UPR, SES, RES, TSK) and I was wondering what's the best way to do that to avoid corruption and low performance. For now we just do: deletion of all the objects import of the (...)
29 septembre 2009 : Solved : Invalid Data in MU Table etc
Hello, we working in a big environment $U Installations > 150. Due to some changes in the environment (Server goes out of Live etc). We have invalid Data in MU Table MU Directories APP Directories and so on. The Node was deleted from Node List but the correspondend Data in these Tables NOT. (...)
23 septembre 2009 : Solved : Dollar Universe Desktop / Execution timing problem
Hello all, preliminary informations: OS=windows XP $U-Version=5.3.1 When I try to display the list of executions of a specific node, the buildup lasts about 10 minutes . Pressing "ESC"-Button you will either see an uncompleted list or a completed list of executions, it depends on the time (...)
17 septembre 2009 : Solved : Successful IU_RTS run .. is a dream ?!
Hi, Greetings to all !! We have $U V5.0 running in a two node OpenVMS cluster (runs on both the ndoes). During every maintenance, we shut down $U in one of the node and run the IU_RTS job from the other node. Not any time we have had a complete reorganization of all FDL $U database files. ( (...)
17 septembre 2009 : Solved : Purge : uxpurge (IU_PUR) vs Purge on the fly
Hello, I've been using Dollar Universe for quite some time (back to V4) and was regularly running the IU_PUR / uxpurge purge. The job was launched every day to ensure $U data files would not grow out of control. I have recently upgraded from V500 to V513 on Unix boxes and V500 to V523 on (...)
17 septembre 2009 : Purge on the fly start
Running version 5.2.3 on Windows 2003 and just added parameteres to uxsetenv and the .def files in the EXEC directory so that purging on the fly is employed. This already works fine on 5.2.3 installations on UNIX servers with the same settings. Purge is set to be 3 days and this was set up (...)
17 septembre 2009 : ux_raz_fic/uxrazfic tool
Hello, as we have several topics mentioning the use or possibility to use the "ux_raz_fic", here are some explanations and comments: ux_raz_fic/uxrazfic (depending on the OS) allows to reinitialize a Dollar Universe data file. It empties the data file and the associated index file. (...)
17 septembre 2009 : Reorg online (uxrgz uni all)
O:\>cd orsyp O:\orsyp>cd lotto5 O:\orsyp\LOTTO5>cd mgr O:\orsyp\LOTTO5\mgr>uxsetenv O:\orsyp\LOTTO5\mgr>ECHO OFF O:\orsyp\LOTTO5\mgr>cd %uxexe% O:\orsyp\LOTTO5\exec>uxrgz uni all Command : (...)
17 septembre 2009 : Reorganization : How often?
Hi, I daily purge the $U files, but do not run the reorganization very frequently, only usually when the performance seem to decrease or after a system crash. Have you got any recommendation? Would once a month be enough? Eric (...)
17 septembre 2009 : ux_raz_fic : what are the recommendations?
Hello, I was checking another thread when I came across the use of ux_raz_fic. I know this tool allows to reinitialize a $U data file but that you should be careful using it. What are the recommendations? Have Orsyp also specific (...)
17 septembre 2009 : Solved : Problem of language
Hello! $Universe 5.0 is installed as for the documentation. I have a problem of language. While using univ5 some of the menu options [ e.g companies, nodes, Management Units, Applications Directories, Users, Sessions etc] are showed in French instead of English!!! . S_U_LANGUE is set to "EN". (...)
8 septembre 2009 : Solved : Successful IU_RTS run .. is a dream ?!
Hi, Greetings to all !! We have $U V5.0 running in a two node OpenVMS cluster (runs on both the ndoes). During every maintenance, we shut down $U in one of the node and run the IU_RTS job from the other node. Not any time we have had a complete reorganization of all FDL $U database files. ( (...)
8 septembre 2009 : Solved : Purge : uxpurge (IU_PUR) vs Purge on the fly
Hello, I've been using Dollar Universe for quite some time (back to V4) and was regularly running the IU_PUR / uxpurge purge. The job was launched every day to ensure $U data files would not grow out of control. I have recently upgraded from V500 to V513 on Unix boxes and V500 to V523 on (...)
8 septembre 2009 : Solved : Purge on the fly start
Running version 5.2.3 on Windows 2003 and just added parameteres to uxsetenv and the .def files in the EXEC directory so that purging on the fly is employed. This already works fine on 5.2.3 installations on UNIX servers with the same settings. Purge is set to be 3 days and this was set up (...)
8 septembre 2009 : Solved : ux_raz_fic/uxrazfic tool
Hello, as we have several topics mentioning the use or possibility to use the "ux_raz_fic", here are some explanations and comments: ux_raz_fic/uxrazfic (depending on the OS) allows to reinitialize a Dollar Universe data file. It empties the data file and the associated index file. (...)
8 septembre 2009 : Solved : Reorg online (uxrgz uni all)
O:\>cd orsyp O:\orsyp>cd lotto5 O:\orsyp\LOTTO5>cd mgr O:\orsyp\LOTTO5\mgr>uxsetenv O:\orsyp\LOTTO5\mgr>ECHO OFF O:\orsyp\LOTTO5\mgr>cd %uxexe% O:\orsyp\LOTTO5\exec>uxrgz uni all Command : (...)
8 septembre 2009 : Solved : Reorganization : How often?
Hi, I daily purge the $U files, but do not run the reorganization very frequently, only usually when the performance seem to decrease or after a system crash. Have you got any recommendation? Would once a month be enough? Eric (...)
8 septembre 2009 : Solved : ux_raz_fic : what are the recommendations?
Hello, I was checking another thread when I came across the use of ux_raz_fic. I know this tool allows to reinitialize a $U data file but that you should be careful using it. What are the recommendations? Have Orsyp also specific (...)
8 septembre 2009 : Solved : Problem of language
Hello! $Universe 5.0 is installed as for the documentation. I have a problem of language. While using univ5 some of the menu options [ e.g companies, nodes, Management Units, Applications Directories, Users, Sessions etc] are showed in French instead of English!!! . S_U_LANGUE is set to "EN". (...)
4 août 2009 : Solved : Frequent $U hang regd. (V4.3 on VAX VMS)
Hi all, Platform: VAX OS: OpenVMS V6.2 $U version: 4.3 We have a customer environment using $U as stated above. Recently we have been facing frequent hang of $Universe resulting in job new jobs getting submitted and jobs found in "Executing" state for a long time than expected. Only $U (...)
4 août 2009 : Solved : Frequent $U hang regd. (V4.3 on VAX VMS)
Hi all, Platform: VAX OS: OpenVMS V6.2 $U version: 4.3 We have a customer environment using $U as stated above. Recently we have been facing frequent hang of $Universe resulting in job new jobs getting submitted and jobs found in "Executing" state for a long time than expected. Only $U (...)
29 juillet 2009 : Solved : New online purge - problems with disabled status
Hello, I've tried to use new online purge, all variables were set for 30 or more days except disabled status (LAN_RET_H=001:00:00). After check I saw disabled launches of jobs for longer period. Then I tried to changed values of other variables one by one, and after I changed the value of (...)
29 juillet 2009 : New online purge - problems with disabled status
Hello, I've tried to use new online purge, all variables were set for 30 or more days except disabled status (LAN_RET_H=001:00:00). After check I saw disabled launches of jobs for longer period. Then I tried to changed values of other variables one by one, and after I changed the value of (...)
23 juillet 2009 : Solved : exchanger problem?
Hello Sirs, at our company we have to start HDP-sessions which run over two MUs. But the exchange from one MU to the other lasts very long. So I created a simple test session called "s_test", which contains a uproc, named "test". The code of this uproc is only "exit 0". The session is (...)
23 juillet 2009 : Solved : exchanger problem?
Hello Sirs, at our company we have to start HDP-sessions which run over two MUs. But the exchange from one MU to the other lasts very long. So I created a simple test session called "s_test", which contains a uproc, named "test". The code of this uproc is only "exit 0". The session is (...)
25 juin 2009 : Solved : Monitoring log files and what to look for ?
Hello, I am recreating this thread initially posted by thetadgh: Hi all I've been looking in my universe.log and finding errors like : "<< 2009-05-06 00:01:32 0000808/UniServEch /u_io_callsrv_ver /000000000 - u_gethostbyname_mf error : Unknown host (host [tgspapp3])" when (...)
25 juin 2009 : Solved : Monitoring log files and what to look for ?
Hello, I am recreating this thread initially posted by thetadgh: Hi all I've been looking in my universe.log and finding errors like : "<< 2009-05-06 00:01:32 0000808/UniServEch /u_io_callsrv_ver /000000000 - u_gethostbyname_mf error : Unknown host (host [tgspapp3])" when (...)
18 juin 2009 : Solved : Error message in universe.log "Aucune connexion n'a pu être établie car l'ordinateur cible l'a expressément refusée"
Hi all, I encounter a strange message in universe.log of global control : << 2009-06-18 11:41:36 0003116/JobMonitorApp /connect_inet_com /135888915 - connection on host <my_node> port 11015 [SOCIETE_DQM_X] err 10061 , -Aucune connexion n'a pu être établie car l'ordinateur (...)
18 juin 2009 : Error message in universe.log
Hi all, I encounter a strange message in universe.log of global control : << 2009-06-18 11:41:36 0003116/JobMonitorApp /connect_inet_com /135888915 - connection on host <my_node> port 11015 [SOCIETE_DQM_X] err 10061 , -Aucune connexion n'a pu être établie car l'ordinateur (...)
17 juin 2009 : Solved : Very big Universe.log
Hi, I'm encountering an issue with my universe.log (Global Control v533 + 24567 and 24584 on windows). It reaches a size of 4Go. I use Graphic Job Monitor and the size of the universe.log is caused by the verbosity of this application : << 2009-06-17 16:49:58 (...)
17 juin 2009 : Very big Universe.log
Hi, I'm encountering an issue with my universe.log (Global Control v533 + 24567 and 24584 on windows). It reaches a size of 4Go. I use Graphic Job Monitor and the size of the universe.log is caused by the verbosity of this application : << 2009-06-17 16:49:58 (...)
17 mars 2009 : IO_PURGE vs. on the fly purge
Reading the last post regarding that topic, I understood that on-the-fly-purge is an old technique and replaced by IO_PURGE. Parameters regarding on-the-fly-purge in uxsetenv should be commented or deleted. Is that right? I was told IO_PURGE replaces uxpurge delivered in uproc IU_PUR each (...)
17 mars 2009 : IO_PURGE vs. on the fly purge
Reading the last post regarding that topic, I understood that on-the-fly-purge is an old technique and replaced by IO_PURGE. Parameters regarding on-the-fly-purge in uxsetenv should be commented or deleted. Is that right? I was told IO_PURGE replaces uxpurge delivered in uproc IU_PUR each (...)
2 mars 2009 : Solved : Delete time overrun jobs
Can someone please help with deleting time-overrun jobs (from the command line)? There are several thousand and trying to delete from the GUI is painful! But I cannot seem to make UXDLT work. Thanks Paul
2 mars 2009 : Solved : Delete time overrun jobs
Can someone please help with deleting time-overrun jobs (from the command line)? There are several thousand and trying to delete from the GUI is painful! But I cannot seem to make UXDLT work. Thanks Paul
9 février 2009 : Solved : Online purge FX24584
Hello, i want to make some tests with the new online purge. We have V5.3.3 UNIX, FX24584 is installed. Parameter U_IO_PURGE_ENABLE is set to Y in the uxsetenv files. I try the command ./chkPurParFic ../exp/data/u_purge_param.ref --> syntax of purge parameters file OK The next (...)
9 février 2009 : Solved : Online purge FX24584
Hello, i want to make some tests with the new online purge. We have V5.3.3 UNIX, FX24584 is installed. Parameter U_IO_PURGE_ENABLE is set to Y in the uxsetenv files. I try the command ./chkPurParFic ../exp/data/u_purge_param.ref --> syntax of purge parameters file OK The next (...)
2 février 2009 : Solved : Historic of "suivi d'exploitation"
Hello, in Dollar universe 5.1, there is a button "Suivi d'exploitation", inside we have the historic. in my $U, there is only 2 historic days. how we can increase the historic day ? Thank you best regards
2 février 2009 : Solved : Historic of "suivi d'exploitation"
Hello, in Dollar universe 5.1, there is a button "Suivi d'exploitation", inside we have the historic. in my $U, there is only 2 historic days. how we can increase the historic day ? Thank you best regards
23 janvier 2009 : Solved : windows Extraction without UXEXT
Helloworld It is possible to use a combinaison of uxlst and uxadd to extract and reimport. Here is a solution on windows to extract user and node objects in text file: CODEset source_node=%1 set nodefile=node_file.txt set userfile=user_file.txt %uxexe%\uxlst NODE TNODE^=* (...)
23 janvier 2009 : Solved : windows Extraction without UXEXT
Helloworld It is possible to use a combinaison of uxlst and uxadd to extract and reimport. Here is a solution on windows to extract user and node objects in text file: CODEset source_node=%1 set nodefile=node_file.txt set userfile=user_file.txt %uxexe%\uxlst NODE TNODE^=* (...)
22 janvier 2009 : Solved : Reorganization taking too much time
Hello, we had a power failure on some of our boxes and some Dollar Universe index files got damaged (Unix / Windows). We ran a reorganization which took between 15 minutes and 2 hours - which was too long. Why was the reorganization so long? How to improve it? We use several Areas on some (...)
22 janvier 2009 : Solved : Reorganization taking too much time
Hello, we had a power failure on some of our boxes and some Dollar Universe index files got damaged (Unix / Windows). We ran a reorganization which took between 15 minutes and 2 hours - which was too long. Why was the reorganization so long? How to improve it? We use several Areas on some (...)
24 décembre 2008 : Solved : ux_razfic
Hello we need to execute the ux_razfic command on u_fmhs50 and u_fmph. Are there any special issues that we have to look after? Yours sincerely, ringhio
24 décembre 2008 : Solved : ux_razfic
Hello we need to execute the ux_razfic command on u_fmhs50 and u_fmph. Are there any special issues that we have to look after? Yours sincerely, ringhio
20 novembre 2008 : Solved : Extract all objects
Hello here is a little command to extract all objects for $U on unix if you want to move them to another node. CODEfor s_esp in app int sim exp; do for s_obj in upr ses; do echo "" >>./extract.log; echo "***********$s_esp $s_obj************" >>./extract.log; (...)
20 novembre 2008 : Solved : Extract all objects
Hello here is a little command to extract all objects for $U on unix if you want to move them to another node. CODEfor s_esp in app int sim exp; do for s_obj in upr ses; do echo "" >>./extract.log; echo "***********$s_esp $s_obj************" >>./extract.log; (...)
11 novembre 2008 : Solved : Automatic startup $U when server starts on Windows
Hello, I am wondering who has experience with ensuring that $U is started when our server gets restarted. Last week we had to restart due to MS patch on the server and everything (services) started nicely but not $U. I prefer not to create my own batch file but I want to call the (...)
11 novembre 2008 : Solved : Automatic startup $U when server starts on Windows
Hello, I am wondering who has experience with ensuring that $U is started when our server gets restarted. Last week we had to restart due to MS patch on the server and everything (services) started nicely but not $U. I prefer not to create my own batch file but I want to call the (...)
3 novembre 2008 : Solved : UXEXE\find command
This doesn't appear to exist in the "Command Line" manual, so presumably it has been added. I have discovered that this command is case sensitive and, consequently, not performing its duties as expected. Can someone advise what the options are and whether I can force it to be non-case (...)
3 novembre 2008 : Solved : UXEXE\find command
This doesn't appear to exist in the "Command Line" manual, so presumably it has been added. I have discovered that this command is case sensitive and, consequently, not performing its duties as expected. Can someone advise what the options are and whether I can force it to be non-case (...)
30 octobre 2008 : Solved : 5.23 and IU_RTS
We have a mixture of 5.20 and 5.23 servers (looking to standardise on 5.23). Is there an update to IU_RTS or is maintenance done differently in the new version?
30 octobre 2008 : Solved : 5.23 and IU_RTS
We have a mixture of 5.20 and 5.23 servers (looking to standardise on 5.23). Is there an update to IU_RTS or is maintenance done differently in the new version?
23 octobre 2008 : Solved : Moving company process
Hi. Is there a procedure for moving company $U from one folder to another ?
23 octobre 2008 : Solved : Moving company process
Hi. Is there a procedure for moving company $U from one folder to another ?
10 octobre 2008 : Solved : Launcher process problems
Hallo everyone Since a couple of days we have a problem with the Launcher process. The launcher process stops working without user intervention and sets the wakeupdate to 2099. (see uxlst command below) As soon as we shut down the $Universe application and restart it, it works again until the (...)
10 octobre 2008 : Solved : Launcher process problems
Hallo everyone Since a couple of days we have a problem with the Launcher process. The launcher process stops working without user intervention and sets the wakeupdate to 2099. (see uxlst command below) As soon as we shut down the $Universe application and restart it, it works again until the (...)
